System / Enclosure |
- Two-way, bi-amplified reference monitor (bass-reflex type) - Free field frequency Response:73Hz ~ 20kHz (+/- 1.5 dB) - Free field cutoff response 62Hz ~ 22kHz (+/- 3.0dB) - Enclosure Resonant Frequency (vent tuning): 62Hz - Measured Maximum Continuous: 101dB SPL / 1m - Harmonic distortion at 90 dB SPL @ 1 m on axis: 0.5% und |
- Low frequency driver |
- Diaphragm Type: Polymer coated paper fiber cone type - Diameter: 4" (101 mm) - Voice Coil: 1.0" (25 mm) - Magnet Type: Ferrite magnet with magnetically shielded - Impedance: 6 ohms |
- High Frequency Driver |
- Diaphragm Type: Natural Silk Dome with Waveguide. - Diameter: 0.75" (19mm) diaphragm - Magnet Type: Ferrite magnet with magnetically shielded - Impedance: 8 ohms |
- Low Frequency Vent Type : Front ported, Slotted aperture - Internal cabinet volume: 3.7 liters - Enclosure Construction: 13mm (5/8 ) Vinyl-laminated M.D.F - Dimensions : (154 mmW x 254 mmH x 217 mmD) |
Amplifier / Crossover |
- Power amplifier topology |
- Class A-B Power amplifier with Servo-loop - DC, Over-load and Over-current Temperature protection - Supply monitoring protection with Mute control |
- Output power rating |
- 30watts (<0.1% THD into 6 ohm) - 25watts (<0.1% THD into 8 ohm) |
- Total Harmonic distortion + Noise: < 0.02% (@ 1 kHz, 100dB SPL) - Signal-to-noise ratio: > 101dB - Slew rate : > 5V/us |
- Input sensitivity control range (@output power 30W, trim) |
+22dBu at control min -9dBu at control max |
- Connector: XLR input, 1/4" TRS Balanced input (impedance 20kOhm) - Crossover: 3.5 kHz, 30dB/otc 4th order active filter - High frequency tilt control : -2dB / Flat / +2dB (@ 10kHz) - Room control : Flat / -2dB / -4dB (@ 100Hz) - Base cut-off frequency control : Flat / 80Hz(THX) / 100Hz (-12dB/octave) - Acoustic System Compensation rage : 45Hz ~ 200Hz, +/-6dB Max - Indicator: power/protection (front, white LED) |
- AC Power Input |
Max rated power : 65 watts 100 ~ 120VAC, 200 ~ 240VAC, 50~60Hz via IEC power INLET |
DA-912 |
- Connector: XLR input (AES/EBU, IEC60958), RCA input (S/PDIF, EIAJ CP1201), RCA thru output - Sample Rates: 192kHz, 176.4kHz, 96k Hz, 88.2 kHz, 48 kHz, 44.1 kHz, 32 kHz. Tolerance: +/- 3% Word Length: 16-24 Bit - Digital Analog Converter: 24-bit/192kHz Multi-bit delta-sigma with 8xdigital filter - Total Harmonic distortion + Noise : 0.0005% (@1kHz, -3dBFS) - Dynamic range : 123dB A-weighted, (@1kHz, -60dBFS) - User interface : Input source selector (AES/EBU/Coaxial), Channel selection (Left/Right), Status indicator LED | |